Altera PCI Development Kit, Cyclone II Edition Getting Started - Manual (Page 20)

2–10 Core Version a.b.c variable Altera Corporation
PCI Development Kit, Cyclone II Edition Getting Started User Guide May 2005
Perform PCI Transactions with the Kit’s Demo Application
8. Review the transaction’s speed from the performance meter and the
transaction’s results from the Display Window (see
Figure 2–4 ).
Figure 2–4. PCI Target Write Transaction (Demo Tab)
PCI Master Write Transaction (Demo Tab)
In this example, the data source is the PCI board and the destination is the
system memory. You can verify this setup in the Command Information
section of the kit’s application.
1. Ensure that the Demo tab is active.
2. Select Master Write from the Commands box.
3. Specify the following settings in the Address/Size box:
● Transfer Length: 4096
● Iterations: 2
4. Click Execute.
5. Review the transaction’s speed from the performance meter and the
transaction’s results from the Display Window (see
Figure 2–5 ).