TOYOTA 2013 Prius PHV - Manual (Page 74)

12
ELECTRIC VEHICLE SYSTEM
Charging
Step 1 Plug the charging cable into the outlet of the external power source.
NOTE: Hanging the CCID on a hook is recommended to reduce the strain on the
outlet and charging cable plug.
- Make sure to hold the body of the plug and insert
LWÀUPO\LQWRWKHRXWOHW
- Check that the power indicator of the CCID
(Charging Circuit Interrupting Device) is
illuminated.
- The surface of the CCID may become hot, but this
does not indicate a malfunction.
Step 2 Press the test button on the CCID to check that the electrical leakage
detection function operates properly.
- If the error warning indicator illuminates when
test button is pressed, the function is operating
correctly.
- After the test is completed, press reset button to
turn off the error warning. Charging cannot occur
while error warning is illuminated.
- If the error warning indicator does not come
on when test button is pressed, the function
may not be operating correctly. Stop charging
immediately and contact your Toyota dealer.
7KH3ULXV3+9PD\EHFKDUJHGLPPHGLDWHO\RUVFKHGXOHGWRFKDUJHDWDVSHFLÀF
time. Before charging, it is recommended that:
-Parking brake is securely set
-All lights are turned off
-The POWER switch is OFF
Start charging