Put the vent plug back on and close securely – TOYOTA 2011 Highlander User Manual

Page 455

Advertising
background image

451

4-3. Do-it-yourself maintenance

4

Mainten

ance an

d ca

re

■

Adding distilled water

Low

O.K.

Remove the vent plug.

Add distilled water.

If the “UPPER”/“MAX” line cannot be seen, check the fluid level by
looking directly at the cell.

Put the vent plug back on and close securely.

■

Before recharging

When recharging, the battery produces hydrogen gas which is flammable
and explosive. Therefore, before recharging:

●

If recharging with the battery installed on the vehicle, be sure to discon-
nect the ground cable.

●

Make sure the power switch on the charger is off when connecting and
disconnecting the charger cables to the battery.

■

After recharging the battery (vehicles with smart key system)

The engine may not start. Follow the procedure below to initialize the sys-
tem.

Shift the shift lever to P.

Open and close any of the doors.

Restart the engine.

STEP

1

STEP

2

STEP

3

STEP

1

STEP

2

STEP

3

Advertising
This manual is related to the following products: