TOYOTA 2011 Sienna - Manual (Page 701)

643
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
Remove the filter.
The “↑UP” marks shown on the
filter should be pointing up.
■ Cleaning method
If the filter is dirty, clean by
blowing compressed air
through the filter from the
underside.
Hold the air gun 2 in. (5 cm)
from the filter and blow for
approximately 2 minutes at
72 psi (500 kPa, 5.0 kgf/cm
2
or
bar).
If an air gun is not available,
have the filter cleaned by your
Toyota dealer.
STEP 5