NISSAN 2010 Sentra User Manual

Page 216

Advertising
background image

WARNING

Apply the parking brake if the shift selec-

tor is in any position while the engine is

not running. Failure to do so could cause

the vehicle to move unexpectedly or roll

away and result in serious personal injury

or property damage.

If the key is turned to the OFF or ACC position for

any reason while the vehicle is in N (Neutral), or

any drive position, the key cannot be turned to the

LOCK position and be removed from the ignition

switch. If this occurs, perform the following steps:

1. Apply the parking brake when the vehicle is

stopped.

2. Move the shift selector to P (Park) to park the

vehicle and turn the ignition switch to the

LOCK position to remove the key.

P (Park):

CAUTION

To prevent transmission damage, use the

P (Park) or R (Reverse) position only when

the vehicle is completely stopped.

Use the P (Park) selector position when the ve-

hicle is parked or when starting the engine. Make

sure the vehicle is completely stopped. The

brake pedal must be depressed and the
shift selector button pushed in to move the
shift selector from N (Neutral) or any drive
position to P (Park).
Apply the parking brake.

When parking on a hill, apply the parking brake

first, then place the shift selector into the P (Park)

position.
R (Reverse):

CAUTION

To prevent transmission damage, use the

P (Park) or R (Reverse) position only when

the vehicle is completely stopped.

Use the R (Reverse) position to back up. Make

sure the vehicle is completely stopped before

selecting R (Reverse) position. R (Reverse)

speed is limited to 25 MPH (40 km/h). Do not

exceed 25 MPH (40 km/h) in the R (Reverse)

position. The brake pedal must be de-

pressed and the shift selector button
pushed in to move the shift selector from P
(Park), N (Neutral) or any drive position to R
(Reverse).

N (Neutral):
Neither forward nor reverse gear is engaged. The

engine can be started in this position. You may

shift to N (Neutral) and restart a stalled engine

while the vehicle is moving.
D (Drive):
Use this position for all normal forward driving.
L (Low):
Use this position for maximum engine braking on

steep downhill gradients/climbing steep slopes

and whenever approaching sharp bends. Do not

use the L (Low) position in any other circum-

stances.

Starting and driving

5-13

Advertising