NISSAN 2010 Sentra User Manual

Page 58

Advertising
background image

1. If you must install a booster seat in the

front seat, move the seat to the rear-

most position.

2. Position the booster seat on the seat. Only

place it in a front-facing direction. Always

follow the booster seat manufacturer’s in-

structions.

3. The booster seat should be positioned on

the vehicle seat so that it is stable.
If necessary, adjust or remove the head re-

straint or headrest to obtain the correct

booster seat fit. If the head restraint or head-

rest is removed, store it in a secure place. Be

sure to reinstall the head restraint or
headrest when the booster seat is re-
moved.
See “Head restraints” or “Adjust-

able headrest” in this section for head re-

straint or headrest adjustment, removal and

installation information.

If the seating position does not have an

adjustable head restraint or headrest and it

is interfering with the proper booster seat fit,

try another seating position or a different

booster seat.

4. Position the lap portion of the seat belt low

and snug on the child’s hips. Be sure to

follow the booster seat manufacturer’s in-

structions for adjusting the seat belt routing.

5. Pull the shoulder belt portion of the seat belt

toward the retractor to take up extra slack.

Be sure the shoulder belt is positioned

across the top, middle portion of the child’s

shoulder. Be sure to follow the booster seat

manufacturer’s instructions for adjusting the

seat belt routing.

6. Follow the warnings, cautions and instruc-

tions for properly fastening a seat belt

shown in “Three-point type seat belt with

retractor” earlier in this section.

WRS0699

Front passenger position

LRS0454

Safety—Seats, seat belts and supplemental restraint system

1-41

Advertising