NISSAN 2009 Sentra User Manual

Page 209

Advertising
background image

To move the selector lever:

Push the button

A

while depressing the

brake pedal

Push the button

A

to shift

Shift without pushing button

A

Shifting

After starting the engine, fully depress the brake
pedal and move the shift selector from P (Park) to
any of the desired shift positions.

WARNING

Apply the parking brake if the selector
lever is in any position while the engine is
not running. Failure to do so could cause
the vehicle to move unexpectedly or roll
away and result in serious personal injury
or property damage.

If the key is turned to the OFF or ACC position for
any reason while the vehicle is in N (Neutral), or
any drive position, the key cannot be turned to the
LOCK position and be removed from the ignition
switch. If this occurs, perform the following steps:

1. Apply the parking brake when the vehicle is

stopped.

2. Move the shift selector to P (Park) to park the

vehicle and turn the ignition key to the LOCK
position to remove the key.

P (Park):

CAUTION

To prevent transmission damage, use the
P (Park) or R (Reverse) position only when
the vehicle is completely stopped.

Use the P (Park) selector position when the ve-
hicle is parked or when starting the engine. Make
sure the vehicle is completely stopped. The
brake pedal must be depressed and the

shift selector button pushed in to move the
shift selector from N (Neutral) or any drive
position to P (Park).
Apply the parking brake.
When parking on a hill, apply the parking brake
first, then place the shift selector into the P (Park)
position.

R (Reverse):

CAUTION

To prevent transmission damage, use the
P (Park) or R (Reverse) position only when
the vehicle is completely stopped.

Use the R (Reverse) position to back up. Make
sure the vehicle is completely stopped before
selecting R (Reverse) position. R (Reverse)
speed is limited to 25 MPH (40 km/h). Do not
exceed 25 MPH (40 km/h) in the R (Reverse)
position. The brake pedal must be de-
pressed and the selector lever button
pushed in to move the selector lever from P
(Park), N (Neutral) or any drive position to R
(Reverse).

N (Neutral):

Neither forward nor reverse gear is engaged. The
engine can be started in this position. You may
shift to N (Neutral) and restart a stalled engine
while the vehicle is moving.

LSD0177

Starting and driving

5-13

REVIEW COPY—

2009 Sentra (sen)

Owners Manual—USA_English (nna)
10/27/08—tbrooks

Advertising