Optoma X304M - Manual (Page 19)

English 19
Control Panel
Using the Control Panel
Power
Refer to the “Power On/Off the Projector”
section on page 15.
Menu
Press Menu to launch the on-screen display
(OSD) menu. To exit OSD, Press Menu again.
▲/Keystone+
(Up arrow)
• Adjust the image Keystone positively.
• Navigates and changes settings in the OSD.
►/Re-Sync
(Right arrow)
• Automatically synchronizes the projector to
the input source.
• Navigates and changes settings in the OSD.
▼/Keystone -
(Down arrow)
• Adjust the image Keystone negatively.
• Navigates and changes settings in the OSD.
◄/Source
(Left arrow)
• Press Source to select an input signal.
• Navigates and changes settings in the OSD.
AV-Mute Momentarily turns off / on the audio and video.
Enter Confirm your item selection.
Power LED
Green
Unit is standby or powered on and
working correctly.
Flashing
Green
Unit is warming up/cooling down /
on Quick Resume (100 sec).
Off Unit is powered off.
Lamp LED
On
Lamp not ready—do not press the
Power button.
Off Lamp is in normal state.
Temp LED
On System over temperature
Off Normal state
User Controls
™ ™ AV mute: Save
up to 70%
of the lamp
power when
AV mute is
applied.