Image, User controls – Optoma W401 User Manual
Page 32
32
English
User Controls
IMAGE
Display Mode
There are many factory presets optimized for various types of
images.
Presentation: Good color and brightness from PC input.
`
Bright: Maximum brightness from PC input.
`
Movie: For home theater.
`
sRGB: Standardised accurate color.
`
Blackboard: This mode should be selected to achieve optimum
`
color settings when projecting onto a blackboard (green).
DICOM SIM.: This display mode simulates the greyscale/gam-
`
ma performance of equipment used for “Digital Imaging and
Communications in Medicine” (DICOM).
IMPORTANT: This mode should NEVER be used for medical diagnosis, it is for
education/training purposes only.
User: User’s settings.
`
3D: Recommended setting for 3D mode enabled. Any further
`
adjustments by the user in 3D will be saved in this mode for
further use.
Brightness
Adjust the brightness of the image.
Press the ◄ to darken image.
`
Press the ► to lighten the image.
`
Contrast
The contrast controls the degree of difference between the lightest
and darkest parts of the picture.
Press the ◄ to decrease the contrast.
`
Press the ► to increase the contrast.
`
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Advanced
Presentation
IMAGE