User controls, How to use web browser to control your projector, 50 english – Optoma W401 User Manual
Page 50
50
English
User Controls
1. Turn on DHCP to allow the DHCP
server to automatically assign an IP, or
manually enter the required network
information.
Network Status
MAC Address
DHCP
IP Address
Subnet Mask
Connected
Exit
Gateway
DNS
Off
2. Then choose apply and press “
” button to complete the configuration
process.
3. Open your web browser and type in the
projector’s IP address from the OSD
LAN screen. The following web page will
display as below:
4. If connecting the projector to external
Crestron control hardware, the settings
can be found in the [tools] tab. (see
picture).
How to use web browser to control your projector
Please note, each field can only contain
a limited number of characters, as shown
in the table below. (spaces and the other
punctuation included):
Category
Item
Input-Length
(characters)
Crestron Control
IP Address
15
IP ID
2
Port
5
Projector
Projector Name
10
Location
9
Assigned To
9
Network
Configuration
DHCP (Enabled)
(N/A)
IP Address
15
Subnet Mask
15
Default Gateway
15
DNS Server
15
User Password
Enabled
(N/A)
New Password
15
Confirm
15
Admin Password
Enabled
(N/A)
New Password
15
Confirm
15