Optoma W401 - Manual (Page 60)

60
English
Appendices
The image is stretched when displaying 16:9 DVD title
When you play anamorphic DVD or 16:9 DVD, the projector `
will show the best image in 16: 9 format on projector side.
If you play the LBX format DVD title, please change the format `
as LBX in projector OSD.
If you play 4:3 format DVD title, please change the format as `
4:3 in projector OSD.
If the image is still stretched, you will also need to adjust the `
aspect ratio by referring to the following:
Please setup the display format as 16:9 (wide) aspect ratio `
type on your DVD player.
Image is too small or too large
Adjust the zoom lever on the top of the projector. `
Move the projector closer to or further from the screen. `
Press “Menu” on the projector panel, go to “Display-->Format”. `
Try the different settings.
Image has slanted sides:
If possible, reposition the projector so that it is centered on the `
screen and below the bottom of the screen.
Use “Display-->V Keystone” from the OSD to make an adjust- `
ment.
Image is reversed
Select “Setup-->Projection” from the OSD and adjust the pro- `
jection direction.
The projector stops responding to all controls
If possible, turn off the projector, then unplug the power cord `
and wait at least 60 seconds before reconnecting power.
Check that “Keypad Lock” is not activated by trying to control `
the projector with the remote control.
Blurry double image
Press “3D Format” button and switch to “Off” to avoid normal `
2D image is blurry double image.
Two images, side-by-side format
Press “3D Format” button and switch to “SBS” for input signal `
is HDMI 1.3 2D 1080i side-by-side.