Optoma W401 - Manual (Page 46)

46
English
User Controls
SETUP | Security
Security
On: Choose “On” to use security verification when the turning `
on the projector.
Off: Choose “Off” to be able to switch on the projector without `
password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the
number of hours the projector can be used. Once this time has
elapsed you will be requested to enter your password again.
Change Password
First time: `
Press “ 1. ” to set the password.
The password has to be 4 digits. 2.
Use number button on the remote to enter your new password 3.
and then press “ ” key to confirm your password.
Change Password: `
(If your remote does not have a number keypad, please use
the up/down arrows to change each digit of the password,
then press enter to confirm)
Press “ 1. ” to input old password.
Use number button to enter current password and then press “ 2.
” to confirm.
Enter new password (4 digits in length) using the number but- 3.
tons on the remote, then press “ ” to confirm.
Enter new password again and press “ 4. ” to confirm.
If the incorrect password is entered 3 times, the projector will `
automatically shut down.
If you have forgotten your password, please contact your local `
office for support.
Pass-code default ™
value is “1234” (first
time).
Security
Security Timer
Change Password
SETUP
Off
Exit
Security
Enter Current Security Code (4 digits)
Incorrect security code. Re-enter again. (Last Try)