Applied Motion TSM17Q-1AG - Manual (Page 20)

20
Rev. A
920-0084
TSM17S/Q Hardware Manual
3.3.5 AIN Input
The TSM17S/Q drives have an analog input (AIN) which can accept a signal range of 0 to 5 volts.
The drive can be configured to operate at a speed or position that is proportional to the analog
signal. Use the Step-Servo Quick Tuner software to set the signal range, offset, dead-band and
filter frequency. The TSM17S/Q provides a +5 volt/100mA limit voltage supply that can be used to
power external devices such as potentiometers. It is not the most accurate supply for reference,
for more precise readings use an external supply that can provide the desired accuracy.
+5v
AIN
GND
100 mA limit
Signal
Conditioning
inside drive
rot
ce
nn
oC
O/I
Ω
+5v OUT
AIN
GND
1 - 10k
pot
TSM17
Connecting a Potentiometer
to the Analog Input