CIRCUTOR CVM144 Series - Manual (Page 37)

----- Supply network analyzer CVM-144 ------ User's manual --- Page No. 36
The DELAY set value is applied either to the connection or the
disconnection when the alarm conditions occur.
User-definable units for the different parameters are:
Parameter Format Example
Voltage V 220.5 = 220.5 V
0220 = 220 V
Current A 0150 = 150 A
Powers kW, kvarL, kvarC 0.540 = 540 W
250.5 = 250.5 kW
Energies kWh, kvarLh, kvarCh 0.500 kWh
Power factor +/- x.xx - 0.70
Frequency xx.x 50.0 = 50 Hz
Output relay connection lay-out CVM-144...-C2 (2 relays ) :
Out1 Terminals Signal Out2 Terminals Signal
RELAY 1 23 - 24 N.O. RELAY 2 21- 22 N.O.