CRU DataPAK User Manual
Page 22
Page 22
Q: What should I do on a reboot when the DataPAK prompts me to “Re-init” the
RAID?
A: If you bought an DataPAK without drives and you want a RAID 5 with 4 disks (de-
fault RAID type) then simply insert your drives and select the “Re-init” (left) button on
the front display. DataPAK will verify the RAID 5 with 4 disks and you can select the
“-Init” (left) button on the front display to set up that RAID.
If you desire a different RAID type or disk number refer to section “4.1.2.3 RAID Tab”
in the User Manual for further instructions.
If you are simply rebooting the unit and want to return to the “Active Menu” then
let the DataPAK complete the start up cycle and it will arrive at the “Active Menu”
momentarily. Do not press any buttons on the front display.