d&b D12 Hardware - Manual (Page 6)

2. Introduction
This manual describes the facilities and functions of the hardware of the
d&b D12 amplifier.
A detailed description of the D12 Software and remote control is given
in the D12 Amplifier Software manual, which is also provided with the
D12 amplifier.
A number of publications with supplementary information on our
products are available from the Documentation section of our website
at www.dbaudio.com. You can either download these directly or use the
online order form to request a printed version.
If the document you want is not detailed on the form, please enter the
title in the box after entering your address information.
2.1. Scope of supply
Initial inspection
Before starting up the following inspections should be carried out:
- Please verify the shipment for completeness (refer to the table below
- Tab. 1).
- Please carry out a visual inspection of the packaging, the D12 unit
and the power cord for obvious damage during shipment.
If there is any sign of damage or incompleteness to the items listed in
the table below please contact your local dealer from whom you
received the unit.
Fig. 1: D12 Amplifier, scope of supply
Quantity d&b Code Description
1 Z2600 D12 Amplifier [1],
dependent on chosen output option
(EP5, NL4 or NL8 output connectors)
1 Z2610 Power cord [2]
D12 CEE (specific to country)
1 K6007.050 RJ45 Patch cable [3]
0.5 m (1.6 ft) CAT 6/AWG 24-STP
(shielded twisted pair) to be used for
daisy chaining multiple amplifiers within a
rack.
1 Z6116 RJ 45 M Terminator [4]
1 D2012.EN D12 Amplifier, Hardware manual [5]
1 D2013.EN D12 Amplifier, Software manual [6]
Tab. 1: D12 Amplifier, scope of supply
D12 Amplifier, Hardware manual (4.9 EN) Page 6 of 28