Datapath RSN870 - Manual (Page 11)

11
Camera Name
Type the camera name into the Camera Name edit box. The name can be up to 31 characters long with no
leading or trailing spaces and must be unique with respect to all other camera names.
Camera Model
Use the camera model drop down list to select the model of the camera that is being configured. This list
will contain a number of pre-configured models along with any additional user configured models that
have been added to the system.
Camera Authorisation
Use the camera authorisation controls to override the camera model’s default settings.
IP Address / Host Name
Use the IP address or host name edit box to set the camera’s network address. This field may also contain
a port number separated by the ‘:’ character (ex. 10.0.0.2:7071). If this edit box is left blank then a warning
prompt will be displayed when the OK button is pressed.
Once the camera configuration is complete press the OK button to create the camera and close the dialog.
Further Reference
To gain full advantage of your new RSN870 it is recommended that you study the online help system that
can be found in the Wall Control-red application Help menu.