Doremi HDG-20 - Manual (Page 5)

2 Menu and Navigation
The HDG-20 has a new user interface. Menu selections are no longer active as soon as you
change them, you must press ENTER to make the change.
The HDG-20 has two modes: Menu mode and Display mode.
 In Menu mode the user can change the HDG-20 parameters
 In Display mode, the HDG-20 will show information about the output signal and genlock
status
In Menu mode, the HDG-20 has 3 levels:
 Main: Selects the Main menu that has the parameter to change.
Menu
02 Audio
 Sub: Selects the parameter to change. The “#” sign at the end of the second line can be
used to identify level 2
Menu-02 AUDIO
Mode: On 1KHz#
 Selection: Make the change. The “*” sign shows the current value. When you hit the UP
or DOWN arrows, the “*” will go away until you hit ENTER.
Menu-02 AUDIO
Mode: On 1KHz*
The HDG-20 powers up in Display mode. To go to Menu mode, press the MENU button. UP
and DOWN buttons will browse all available selection at that level. ENTER will make the
selection and every time you press MENU it will go back one level until you get to Display mode.
HDG.OM.000248.DRM Page 5 of 24 Version 1.6
Doremi Labs