Junger Audio X*AP RM1 - Manual (Page 4)

Rev. 140328
X*AP RM
1
Hardware features
• 1RU remote panel detachable panel with case, powered by POE (Power Over Ethernet)
• Rotary encoder high resolution encoder for parameter settings, volume control
(turn&push) etc. with push function, e.g. for confirmation of settings
• 8 Function Keys F-Keys - function assigned by the application
Hot-Keys – function assigned by the user
• MENU button for menu control
• ESC button for menu navigation
• PAGE button may swap displays
• METER control button selection of the display of the LED bar graphs
• BYPASS button initiates a bypass function of the attached base unit
• OLED display graphical display
• 8 LED bar graphs 16 segment multicolor bar graph display
• Status LED shows the device summary status provided by the attached device
• Power 1/2 LED status of the two power supplies of a attached base unit
• BYPASS LED shows the active bypass status of the attached base unit
• RJ45 POE connector RJ45 rear connector for Power Over Ethernet connection
• USB-B connector built in USB < > serial adapter to access the service port
Software features
•
Web server http connection with the device for setup and firmware update
• SNMP agent SNMP v1 get (no set) and configurable traps (see TAP-MIB)
• EmBER protocol communication layer for connection with a base unit or 3
rd
party
applications
operating manual