KBC Networks ESUG8P - Manual (Page 5)

Ethernet Switch User Manual
Manual-ESUG8P_Series_HW-Rev1112
Copyright © KBC Networks Ltd.
Page 5 of 14 www.kbcnetworks.com
2 Installation
2.1 Package Contents
• Ethernet switch fitted with DIN rail mount.
• 2 x Wall-mount brackets with screws
• Pluggable terminal block
• Quick Start Guide
Note: A 50 – 57Vdc PSU is required but supplied separately.
Please contact you dealer or distributor if a part is missing or damaged.
2.2 Configurations
Products are available in either DIN rail or wall-mount packages, with the following
configurations:
Product Type DIN Rail Wall-mount
ESUG8P