KBC Networks FCHA1-M1T-R-WSB User Manual
Page 6
User Manual
Manual-FCHA1-Rev1009.pdf Page 4 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd
Connectors:
DC or AC Power Supply between 12V and 24V can be used on this product.
• DC:
+
: +12VDC~+24VDC
-
: Power Supply Ground
• AC:
There is no difference between
+/-; the power supply can be connected into
the device directly.
FIB: Fiber Optic connector.
GND: Ground pin.
LEDs Definition:
POW: Power Supply.
On
if power input is in OK.
FIB: Fiber
Link.
Off
if the link is in OK.
V: Video.
On
if video input is in OK.
C1:
Channel 1 Contact Closure input.
On
if the contact input is closed.
C2:
Channel 1 Contact Closure output. On if the contact output is closed.
C3:
Channel 2 Contact Closure input.
On
if the contact input is closed.
C4: Channel 2 Contact Closure output. On if the contact output is closed.
The other is reserved.
3.2 Receiver