KBC Networks FCHA1-M1T-R-WSB - Manual (Page 7)

User Manual
Manual-FCHA1-Rev1009.pdf Page 5 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd
Connectors:
C1: Channel 1 Contact Closure input.
C2: Channel 1 Contact Closure output.
C3: Channel 2 Contact Closure input.
C4: Channel 2 Contact Closure output.
Terminal pins assignment:
Channel 1 contact closure input “A”
Channel 1 contact closure input “B”
Channel 1 contact closure output “A”
Channel 1 contact closure output “B”
Channel 2 contact closure input “A”
Channel 2 contact closure input “B”
Channel 2 contact closure output “A”
Channel 2 contact closure output “B”
Connectors:
DC or AC Power Supply between 12V and 24V can be used on this product.
• DC:
＋ : +12VDC~+24VDC
－ : Power Supply Ground
• AC:
There is no difference between ＋/－; the power supply can be connected into
the device directly.
FIB: Fiber Optic connector.
GND: Grounded pin.
1
2
3
4
5
6
7
8