KLING & FREITAG K&F Line 212-9 - Manual (Page 13)

User's Manual LINE 212-6 / LINE 212-9
KLING & FREITAG GMBH ©2003 - 2005 Version 5.0, 23.03.2006 Seite 13 von 37
6. Using the Rear Mounted ‘allsafe JUNGFALK’ Flying Track
The ‘allsafe JUNGFALK’ Flying Track can be used for fixing and adjusting the speaker
systems.
The ‘allsafe JUNGFALK’ Flying Track can only support weights up to 73 kg!
Please also consult the provided instructions for speakers and assembly equip-
ment.
6.1 Mounting the Single Stud Fittings
Single Stud Fitting
Used as fastener to the ‘allsafe
JUNGFALK’ Flying Point and the
‘allsafe JUNGFALK’ Flying Track.
‘allsafe JUNGFALK’ Flying Track
Receptacle for special fasteners such
as the single stud fitting.
1.) 2.)
Take the single stud fitting in one
hand... ... and push the locking device up
against the spring tension.
3.) 4.)
Slide the flat head of the holding
bolt into the guiding device of
the flying track and slide the sin-
gle stud fitting sideways into the
flying track. Release the locking device when the
single stud fitting is located over the
tabs of the track. Make sure that the
locking device clicks into place and
check that it is securely fastened.
Warning
Warning