KLING & FREITAG K&F Line 212-9 - Manual (Page 4)

User's Manual LINE 212-6 / LINE 212-9
KLING & FREITAG GMBH ©2003 - 2005 Version 5.0, 23.03.2006 Page 4 of 37
Contents
Chapter Page
1. General Safety Instructions for Speakers 6
2. Product Descriptions and Versions 8
2.1 LINE 212 - 6 8
2.2 LINE 212 - 9 8
3. Important Notes for the ‘Outdoor’ Option 9
3.1 ‘Outdoor Mobile’ 9
3.2 ‘Outdoor Installation’ 9
4. Rigging Instructions for Line 212 Systems 10
4.1 Vertical Suspension 10
4.2 Horizontal Suspension 11
5. Using the ‘allsafe JUNGFALK’ Flying Points 12
6. Using the Rear Mounted ‘allsafe JUNGFALK’ Flying Track 13
6.1 Mounting the Single Stud Fittings 13
6.2 Mounting the Double Stud Fittings 14
7. Coverage Pattern of the Line 212 Systems 15
7.1 Changing the Coverage Pattern 15
8. Mounting Instructions for Speakers 16
8.1 Proper Arrangement of the Loudspeakers 16
8.2 Arrayed Speaker Systems (Cluster) 17
8.3 LINE 212 Systems on Top of SW 215E 18
9. Operations with the K&F C2 Controller 19
9.1 Operations with Additional Bass Systems via C2 20
9.1.1 Line 212 via C2 and Bass B10 via C10 Controller 20
9.1.2 Line 212 and Bass B10 via C2 in 2-Way Active Mode 20
9.1.3 Line 212 via C2 in Full-Range Mode and Bass B10 via C10 21
10. Wiring 22
10.1 Connecting the Speakon Plugs to the Connecting Terminal 22
10.2 Avoiding Ground Loops 23
10.2.1 What is a Ground Loop? 23
10.2.2 Avoiding Ground Loops 23
10.3 Connecting Schemes 24
10.3.1 Line 212 with Controller C2 in Full-Range Mode 24
10.3.2 Line 212 and Bass with Controller C2 in 2-Way Active Mode 25
10.3.3 Additional Bass System B10 via Controller C10 25
11. Operating the LINE 212 System 26