KLING & FREITAG K&F Line 212-9 - SP - Manual (Page 17)

User’s Manual LINE 212-6 - SP / LINE 212-9 - SP
KLING & FREITAG GMBH ©2003 - 2014 Version 5.0, 09.09.2014 Page 17 of 44
7. Using the Rear Mounted ‘allsafe JUNGFALK’ Flying Track
The ‘allsafe JUNGFALK’ flying track can be used for fixing and adjust-
ing the speaker systems.
The ‘allsafe JUNGFALK’ flying track can only support weights
up to 73 kg!
Please also consult the provided instructions for speakers and
assembly equipment.
7.1 Mounting the Single Stud Fittings
Single Stud Fitting
Used as fastener to the ‘allsafe
JUNGFALK’ Flying Point and the
‘allsafe JUNGFALK’ Flying Track.
‘allsafe JUNGFALK’ Flying Track
Receptacle for special fasteners such
as the single stud fitting.
1.) 2.)
Take the single stud fitting in one
hand... ... and push the locking device up
against the spring tension.
3.) 4.)
Slide the flat head of the holding
bolt into the guiding device of
the flying track and slide the sin-
gle stud fitting sideways into the
flying track. Release the locking device when the
single stud fitting is located over the
tabs of the track. Make sure that the
locking device clicks into place. Make
sure that it is secured tightly.
Warning
Warning