KLING & FREITAG K&F Line 212-9 - SP - Manual (Page 26)

User’s Manual LINE 212-6 - SP / LINE 212-9 - SP
KLING & FREITAG GMBH ©2003 - 2014 Version 5.1, 09.09.2014 Page 26 of 44
11.1.2 Full Range Mode with Subwoofer
You can link the input signal (for example from the mixer) from one loudspeaker to
another. It makes no difference whether the input signal reaches the bass speaker first
and is then transmitted to the mid-high speaker or the other way around.
The switch ‘FILTERS’ on The switch ‘FILTERS’ on The switch ‘FILTERS’ on The switch ‘FILTERS’ on
the SP speaker must be at the SP speaker must be at the SP speaker must be at the SP speaker must be at
‘ON’ in this mode. ‘ON’ in this mode. ‘ON’ in this mode. ‘ON’ in this mode.
If you need a high-boost for covering larger distances (compensation of high frequency
attenuation), then increase the ‘
EQ HIGH BOOST’ frequency as in the following table!
If the mid-high systems are operated in a cluster (speakers are set up directly next to one
another), then lower the ‘
EQ LOW CUT’ frequency as described below!
EQ HIGH BOOST EQ LOW CUT
Frequency 14000Hz 120Hz
Quality (Q) 2.6 0.55
Bandwidth (oct.) 0.55 2.35
Level +4.4dB -2.95dB
INPUT
Channel 2
Channel 1
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
To next
'SP'-Top
or Sub
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
To next
'SP'-Top
or Sub