Monroe Electronics Charge Plate - Analyzer - model 300 - Manual (Page 38)

38
Figure 12
Run the 300 PC software again, and the 300 is power up to the prompt,
-.-, without showing
“COMM ERR”.
The Model 300 software will search for the comport and the devices. Select the comport with
CPA-300, then click the [Select highlighted comport and exit].
Figure 13
Now the PC is connected to the 300 via USB.
After the driver is updated successfully,
the Devices and Printers page will show
the USB to UART icon for the 300 USB.
It is on Com6 in this example.