Monroe Electronics R184 User Manual
Page 10
Advertising
• After the software is installed, write down the unit IDs of the individual units for the
configuration to follow.
• It is advantageous to name the individual units and record the name with the unit ID
numbers.
• If the RF inputs are identified by name, the association of each RF input with its
corresponding port number on an individual switch unit should be recorded. {See page 14
for an illustration.]
• To begin setting up the software with the hardware, click on the R184 on your desktop icon to
open the program.
• Selecting Configure New Unit/Matrix allows us to Select Connection.
• We will illustrate setting up a LAN connection.
• The Comport connection is set up in similarly.
10
Advertising