Hgmc-11s – Neotech Communications HGMC-11S User Manual
Page 4
Advertising
HGMC-11S
Hardened 1-port 1000Base-TX to 1000Base-FX SFP Media Converter
4
V1.0
Assembly, Startup, and Dismantling
Installation
Installation: Mount the Micro type unit onto a fixture, or camera housings, e.g. a plank, (either on the wall or on
a flat surface) with at least 2 screws piercing through the holes on the mounting frame to secure it in position.
Startup: Connect the supply voltage to start up the Media Converter via the terminal block.
Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.
Manual Earth Green manual is available on our website.
www.neotechcomm.com.tw
Advertising