NEXCOM NISE 3100eP2 - Manual (Page 48)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 35
Chapter 3: System Setup
NISE 3100e, NISE 3100eP2, NISE 3150e User Manual
Installing the CPU
1. Loosen the mounting screws that secure the heat sink to the chassis.
Make sure all power cables are unplugged before you install the •
CPU.
The CPU socket must not come in contact with anything other
•
than the CPU. Avoid unnecessary exposure.
Heat sink
Mounting
screw
2. The gold triangular mark on the CPU must align with pin 1 of the CPU
socket.
Gold triangular
mark
Handle the CPU by its edges and avoid touching the pins.
CPU
socket