Power consumption measurement – NEXCOM NISE 3100eP2 User Manual
Page 73
Advertising
Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved.
60
NISE 3100e, NISE 3100eP2, NISE 3150e User Manual
Appendix A: Power Consumption
Power Consumption Measurement
Purpose
The purpose of the power consumption test is to verify the power dissipa-
tion of the system and the load of the power supply.
Test Equipment
PROVA CM-07 AC/DC CLAMP METER
Device Under Test
DUT: Sys #1 / Sys #2
Test Procedure
1. Power up the DUT then boot Windows XP.
2. Enter the standby mode (HDD power down).
3. Measure the power consumption and record it.
4. Run the Burn-in test program to apply 100% full loading.
5. Measure the power consumption and record it.
Test Data
Sys #1
Sys #2
+19V
+19V
Full-Loading Mode
2.1A
2.3A
Total
39.9W
43.7W
Standby Mode
1.1A
1.2A
Total
20.9A
22.8W
Advertising