NEXCOM NISE 3100eP2 - Manual (Page 62)

Copyright © 2009 NEXCOM International Co., Ltd. All Rights Reserved. 49 NISE 3100e, NISE 3100eP2, NISE 3150e User Manual
Chapter 4: BIOS Setup
On-Chip Frame Buffer Size
This field is used to select the onboard VGA’s frame buffer size that is
shared from the system memory.
Boot Display
This field is used to select the type of display to use when the system
boots.
CRT
LVDS
CRT+LVDS
DVI
CRT+DVI
Panel Number
This field is used to select the type of panel that you are using. The op-
tions are:
800x600 18bit S
1024x768 18bit S
Init Display First
Onboard
When the system boots, it will first initialize the onboard VGA.
PCI Slot
When the system boots, it will first initialize PCI.