Appendix c: watchdog timer setting, Ite8783 watchdog programming guide – NEXCOM nTUF 600 User Manual
Page 100
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
86
nTUF 600 User Manual
Appendix C: Watchdog Timer Setting
Appendix C: Watchdog Timer Setting
ITE8783 WatchDog Programming Guide
#define SUPERIO_PORT 0x2E
#define WDT_SET
0x72
#define WDT_VALUE 0x73
void main(void)
{
#Enter SuperIO Configuration
outportb(SUPERIO_PORT, 0x87);
outportb(SUPERIO_PORT, 0x01);
outportb(SUPERIO_PORT, 0x55);
outportb(SUPERIO_PORT, 0x55);
# Set LDN
outportb(SUPERIO_PORT,0x07);
outportb(SUPERIO_PORT+1 ,0x07);
# Set WDT setting
outportb(SUPERIO_PORT, WDT_SET);
outportb(SUPERIO_PORT+1 , 0xC0);
# Use the Second to come down
# If choose the Minute, change value to 0x40
# Set WDT sec/min
outportb(SUPERIO_PORT, WDT_VALUE);
outportb(SUPERIO_PORT+1 , 0x05);
#Set 5 seconds
}