NEXCOM nTUF 600 - Manual (Page 55)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 41 nTUF 600 User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Chassis Cover
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
CAUTION! CAUTION! CAUTION!
Before you stare, please kindly make sure that you have a torx
screwdriver with you.
Torx Screwdriver
1. With the bottom side of the chassis facing up, remove the mounting
screw of the bottom cover and then put them in a safe place for later use.