NEXCOM nTUF 600 - Manual (Page 94)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 80 nTUF 600 User Manual
Chapter 4: BIOS Setup
Security Advanced Boot Chipset PCIPnP Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Install or Change the password. Security Settings
User Password :Not Installed
Change User Password
Security
Exit
Change User Password
This field is used to set or change the user password.
To set a new password:
1. Select the Change User Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You are limited
to eight letters/numbers.
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
Security Advanced Boot Chipset PCIPnP Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Install or Change the password. Security Settings
User Password :Not Installed
Change User Password
Exit
Enter New Password