NEXCOM NEX 732L2G - Manual (Page 43)

42 Chapter 4 NEX732L2G User Manual
AGP Aperture Size (MB)
This item defines the size of the aperture if you use an AGP graphics adapter. The AGP aperture refers to a
section of the PCI memory address range used for graphics memory. The available choices are: 4M, 8M,
16M, 32M, 64M, 128 M and 256M.
Init Display First
This item allows you to activate PCI slot or AGP display first. The choices are: PCI slot, Onboard/AGP.
DRAM Data Integrity Mode
It can support the ECC (Error-Correcting Code) function while utilizing parity modules. To enable this function,
users must set RAM Data Integrity Mode to [ECC] through chipset Features Setup from the BIOS setup
screen. All in all, ECC function is to detect and correct the errors of transfer data.
4.10 Integrated Peripherals
Figure 4-5: BIOS – Integrated Peripherals
OnChip IDE Device
Select this item to setup the IDE device features. When you select this item, the following menu shows: