NEXCOM NEX 732L2G - Manual (Page 70)

69 Appendix C NEX732L2G User Manual
C.1 Reflash BIOS Procedure (N732T00B.bin)
Instructions for the flash BIOS are as follows:
1. Prepare a flash floppy disk
Using DOS O/S format, a boot disk with file command.com only, no himem.sys or other memory manager
devices loaded during flash procedure, copy the attached flash utility and the “.bin” BIOS file to the boot
disk.
2. Flash BIOS Procedure
Boot from the flash disk and type the following command line under A prompt
A:>af826 N732T00B.bin/sn/py/cd/cp/cc/F
Hit “Enter” to flash the BIOS
3. After Flash BIOS
Hit “Delete” to get into the BIOS and load the optimized default setting. Change any setting you want, and
then “Save” and “Exit”.