Plugging the dc power cable – NEXCOM OPPC 1520T User Manual
Page 77
Advertising

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
62
Chapter 3: System Setup
OPPC 1520T/1720T User Manual
Plugging the DC Power Cable
1. Plug the DC 4-pin DIN power jack (male) into the DC 4-pin DIN power
jack (female) that is on the system.
2. The table below shows the pin definition of the cable.
Color
Pin Definition
Black
GND
Red&Yellow
DC+
Blue&Black
DC-
Advertising
This manual is related to the following products: