NEXCOM OPPC 1520T - Manual (Page 79)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 64
Chapter 3: System Setup
OPPC 1520T/1720T User Manual
2. Position the mounting clamps along the rear edges of the Panel PC.
The first and second clamps must be positioned and secured diagonally
prior to mounting the rest of the clamps. Tighten the clamp’s screw
until it touches the panel. Do not overtighten the screws to prevent
damaging the Panel PC.
Panel Mount Kit (Optional)
1. The optional mounting clamps must be attached along the rear edges
of the Panel PC.
Clamp
Panel
OPPC 1720T
OPPC 1520T