NEXCOM NViS 2280 - Manual (Page 81)

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved 68 NViS 2280 User Manual
Chapter 3: System Setup
Super IO Configuration
This section is used to configure the serial ports.
Super IO Chip
Displays the Super I/O chip used on the board.
Serial Port 0 Configuration
This section is used to configure serial port 0.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port 0 Mode
Select this to change the serial port mode to RS232, RS422 or RS485.
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.