Installing a sata hard drive – NEXCOM NDiS 126 User Manual
Page 43
Advertising
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
30
NDiS 126 User Manual
Chapter 3: System Setup
Installing a SATA Hard Drive
1. The drive bracket included in the chassis is used to hold a SATA hard
drive. Disassembly HDD bracket from system to install SATA Hard Drive.
2. Place the SATA hard drive onto the drive bracket. Align the mounting
holes that are on the sides of the SATA drive with the mounting holes
on the drive bracket.
SATA
Hard Drive
Drive
Bracket
HDD
Bracket
Advertising