Super io configuration, Serial port 0 configuration, Cir configuration – NEXCOM NDiS 126 User Manual
Page 69
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
56
NDiS 126 User Manual
Chapter 4: BIOS Setup
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.13.1216. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Set Parameters of Serial Port
0 (COMA)
Super IO Configuration
Serial Port 0 Configuration
CIR Controller Configuration
Serial Port 0 Configuration
Selects the IO/IRQ setting of the I/O devices.
CIR Configuration
Set Parameters for CIR Controller (CIR)