Installing a wireless lan module – NEXCOM NDiS B842 User Manual
Page 49
Advertising
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
35
NDiS B862/B842 User Manual
Chapter 3: System Setup
Installing a Wireless LAN Module
1. Remove the antenna hole covers at the rear of the chassis.
Antenna hole
covers
2. Locate the mini-PCIe connector (CN11) on the mainboard. If the HDD is
installed, please remove it to locate the connector.
Mini-PCIe connector
(CN11)
Advertising
This manual is related to the following products: