Installing a 3g module – NEXCOM NDiS B842 User Manual
Page 57
Advertising
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
43
NDiS B862/B842 User Manual
Chapter 3: System Setup
Installing a 3G Module
1. Remove the antenna hole cover at the rear of the chassis.
Antenna hole cover
2. Locate the mini-PCIe connector (CN10) on the mainboard. If the HDD is
installed, please remove it to locate the connector.
Mini-PCIe connector
(CN10)
Advertising
This manual is related to the following products: