NEXCOM NSA 3130 - Manual (Page 94)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 81 NSA 3130 User Manual
Power OFF state Bypass Control Function
Power Off state Bypass Configuration Register = 0XF7
Bit 0: Segment 1 (facing the front panel, the rightmost is the
1st Bypass)
Bit 1: Segment 2 (facing the front panel, the second from the
right is the 2nd Bypass)
Bit 2: Segment 3 (facing the front panel, the third from the
right is the 3rd Bypass)
Bit 3: Segment 4 (facing the front panel, the fourth from the
right is the 4th Bypass)
0 - Set segment bypass Disable when power off
1 - Set segment bypass Enable when power off