nMediaPC PRO-LCD - Manual (Page 12)

12 / 40
M·Play Home Center
You can setup USB/Com port, fonts and languages, and can also change Starting and Ending Messages.
Control Device : It recognizes which model is used automatically, and does not need to change except in special case.
Communication Setup : It recognizes which port is used automatically, does not need to change except in special case.
Program Setup : You can select a desired language and font for the M·PLAY Home Center. When it starts Windows first,
you can also start M·PLAY Home Center and put it at the tray on the bottom right side.
User Message Setup : You can write your own starting/ ending messages.
VFD Brightness : You can set the desired VFD brightness on your OS system. ‘Start’ is the VFD brightness when the PC
is on and ‘End’ is the VFD brightness when the PC is off or in Standby mode & Hibernate mode. (without supporting
LCD model)
Auto user menu is the mode to treat users setting list and ‘plug-in precedence’ automatically. Except to see the specific
information only, we recommend using this Auto user so as to look easy and various information.