Paxton Superchargers Mustang Novi 1220 - Manual (Page 15)

P/N: 4809631
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
23MAY07 v1.0 Template(4809631v1.0)
5-1
Fig. 5.0-a
A. Relocate the relay using the stock screw.
B. Locate the fuel management unit against the
inner fender panel ahead of the shock tower
about an inch from the top. Drill holes and
secure with the sheet metal screws provided.
(See Fig. 5.0-a.)
C. Disconnect the fuel rail return line at the rubber
hose on the engine's lower right side with a
3/8" spring lock disconnect tool. The return
line does not have the pressure test fitting on it.
5.0 FUEL MANAGEMENT UNIT
INSTALLATION
FMU
RELAY
SHOCK TOWER
CONNECT TO
MANIFOLD
VACUUM/PRESSURE
INLET
FUEL LINE
FROM
STOCK
REGULATOR
OUTLET
(FUEL FROM HERE
RETURNS TO TANK)
Section 5
FUEL MANAGEMENT UNIT