Signamax 10/100 to 100FX PoE+ PSE DIN-Rail Mount Hardened Компьютерные Аксессуары - Manual (Page 11)

Signamax 10/100TX to 100FX Industrial PoE Media Converter
User’s Manual
9
Installation
This chapter gives step-by-step installation instructions for
the Converter.
Selecting a Site for the Equipment
As with any electric device, you should place the equipment
where it will not be subjected to extreme temperatures,
humidity, or electromagnetic interference. Specifically, the
site you select should meet the following requirements:
 The ambient temperature should be between 14 and 140 degrees
Fahrenheit (-10 to 60 degrees Celsius).
 The relative humidity should be less than 95 percent, non-condensing.
 Surrounding electrical devices should not exceed the electromagnetic field
(RFC) standards.
 Make sure that the equipment receives adequate ventilation. Do not block
the ventilation holes on each side of the equipment.
 The power outlet should be within 1.8 meters of the product.
Wiring Diagram
Field Wiring Terminal Markings: Use Copper Conductors
Only, 140/167℉ (60/75℃), wire range 12-24 AWG, torque
value 7 lb-in.