Xilica XD Series User Manual
XCONSOLE COMMUNICATION PROTOCOL (April, 2008)
Serial Settings for the master terminal:
8 data bits
2 stop bits
No Flow Control
Serial Settings for the Xilica device:
Device# set as the same as the protocol Device# (Device 1 in the system menu of the device refers to Device
0 (<20>) in the protocol)
Format used is readable ASCII (96 values for each character) unless specified otherwise:
Value ASCII Denote
Note: All Device#, Channel#, Aux# starts from 0 (<20> in the protocol) for Device 1, Channel 1, Aux 1 respectively.
This is called zero-based in computer programming.