Xtramus LB-300 V1.0 User Manual
Page 9
9
Back Panel of LB-300
LED
LED Status
Description
Green ON
LB-300 is power ON.
Power
OFF
LB-300 is power OFF.
Green ON
The connection speed of LB-300’s RJ45 Port is 1000 Mbps.
Speed
Green Blinking The connection speed of LB-300’s RJ45 Port is 10/100 Mbps.
Green ON
LB-300 is recharging its battery.
Green Blinking LB-300’s battery is low and needs recharging.
Asym. Amber
ON
LB-300 is running under Asymmetric (End to End) Mode.
Loopback 1/2
Green ON
LB-300 is running under Layer 1/2 Loopback.
•
Layer 1 Loopback: LB-300 filters out broadcast, multicast
and null DA packets and resend the rest of incoming
packets directly.
•
Layer 2 Loopback: LB-300 resend packets with switched
DA/SA (destination/source MAC address) and recalculated
CRC for different applications.
Pass Green
ON
The Pass LED will be ON if the test passes.
Fail Red
ON
The Fail LED will be ON if the test fails.
Tx/Rx Green
Blinking
LB-300 is transmitting/receiving packets.
Amber ON
LB-300 has established connection with NuDOG-301.
CRC Red
Blinking
LB-300 had received packets with CRC error.
Lost Red
ON
Packets are lost during transmitting/receiving.
<64 Red
ON
Packets with packet lengths less than 64 Bytes are detected.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES
®